Aftermarket Steering Wheel Hub - AcuraLegend.Org - The Acura Legend Forum for All Generations of the Honda / Acura Legend; 1986 to Present

TheLegendOfSpeeD · 01-19-2015, 07:15 AM

Spent the last few days reading all the threads regarding this topic and the consensus is it's either:

Momo 4903 (compatible with many Hondas/Acuras)
Momo 4916 (compatible with the NSX, which has the same spline has KA7/8)

What I also noticed is most of those threads were 3+ years ago. I just wanted to ask how have they been holding up?

3GCVC · 02-08-2015, 02:00 AM

I used a Works Bell #211, it needed slight modifications to the backing plastic on the boss kit where the clock spring pegs go through but it was five minutes work and very straight forward.

Works Bell is a quality Japanese brand so long as you follow the instructions and do not torque it down any tighter than in the instructions.

TheLegendOfSpeeD · 02-08-2015, 03:21 AM

Thank you for the response. I was originally looking for the Works Bell #290S which is the for NSX, but now I will look for the #211 as well.

01-19-2015, 07:15 AM	#1
TheLegendOfSpeeD Junior Member Join Date: Nov 2009 Posts: 75	Aftermarket Steering Wheel Hub Spent the last few days reading all the threads regarding this topic and the consensus is it's either: Momo 4903 (compatible with many Hondas/Acuras) Momo 4916 (compatible with the NSX, which has the same spline has KA7/8) What I also noticed is most of those threads were 3+ years ago. I just wanted to ask how have they been holding up?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
steering wheel controls to aftermarket stereo	90LegendJim	1st Gen. Legend General Discussion	11	06-05-2014 10:55 AM
steering wheel control with aftermarket radio	Dreams94coupe	Audio and Other Electronics	9	06-27-2013 05:39 PM
SWI JACK, Steering wheel audio contols and aftermarket headunit	Bocsta	2nd Gen. Legend General Discussion	18	04-24-2012 02:51 PM
Aftermarket steering wheel.	T-Clyde	Non-OEM Parts	9	08-12-2011 02:27 PM
question about aftermarket steering wheels	Canadian144	2nd Gen. Legend General Discussion	2	07-24-2011 06:27 AM

02-08-2015, 02:00 AM	#2
3GCVC Quest for the Ti... Join Date: Jun 2009 Location: NP, New Zealand Posts: 485 Real Name: Alex	I used a Works Bell #211, it needed slight modifications to the backing plastic on the boss kit where the clock spring pegs go through but it was five minutes work and very straight forward. Works Bell is a quality Japanese brand so long as you follow the instructions and do not torque it down any tighter than in the instructions.

02-08-2015, 03:21 AM	#3
TheLegendOfSpeeD Junior Member Join Date: Nov 2009 Posts: 75	Thank you for the response. I was originally looking for the Works Bell #290S which is the for NSX, but now I will look for the #211 as well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)