DIY: DRL in JDM fog lights DIY

[omni]

im curious as to if the JDM one piecers are set up the same way as the CSDM (canadian legends) meaning that its almost a direct OEM swap between them. We have DRL's here so instead of DRLS ill just have fogs running all the time? if i want a high beam with the JDMs, will that penetrate the yellow filament alright? Could someone enlighten me because im a little confused as to how i'm to set up my one piecers when they come in.

Once again i have a CSDM legend where circular lights are DRL and hibeam when clicked on. (single filament that runs on two different currents) and then my normal headlights (When i turn them on are the large ovals).

Also i was wondering if i can replace my corner lights with blue or white LEDS, and how this would look function in the one piecers.

[sdgayoon]

Originally Posted by omni

im curious as to if the JDM one piecers are set up the same way as the CSDM (canadian legends) meaning that its almost a direct OEM swap between them. We have DRL's here so instead of DRLS ill just have fogs running all the time? if i want a high beam with the JDMs, will that penetrate the yellow filament alright? Could someone enlighten me because im a little confused as to how i'm to set up my one piecers when they come in.

Once again i have a CSDM legend where circular lights are DRL and hibeam when clicked on. (single filament that runs on two different currents) and then my normal headlights (When i turn them on are the large ovals).

Also i was wondering if i can replace my corner lights with blue or white LEDS, and how this would look function in the one piecers.

Oem bulb for JDM one piece headlight is h4h(=R702K) which has two filaments in a bulb ; one for low-beam, the other for high-beam.
If you use oem bulb, you have no problem with the high beam and fog light.

[bsmooth1027]

has anyone ever tried this ??? i ran everything the way he describes few issues i ran into for some reason the fogs only kick on with the high beam switch on but the lights off they do turn on but its weird like the high beam is activateing the jdm fogs

[Alperovich]

Originally Posted by bsmooth1027

has anyone ever tried this ??? i ran everything the way he describes few issues i ran into for some reason the fogs only kick on with the high beam switch on but the lights off they do turn on but its weird like the high beam is activateing the jdm fogs

you tapped in the wrong wire for the "HLP" connection for the 85/86, it sounds like. as that's what's turning the relay on, OR you for the wrong relay. or you need to flip the 87 with the 87a connection

[bsmooth1027]

i org tried the 87 side but than the fogs dont turn off at all

[Alperovich]

also you guys don't need to be tapping into the ing switch directly, the fuse box has an output for this



brian, what wire did you tap into for the "HLP"

[bsmooth1027]

blk - and red/yellow +